Metering and mixing technology for mobile energy and batteries

Dispensing sealing foam, adhesives, thermally conductive materials and lubricants

Batteries and charging systems supply the ‘mobile energy’ for electrical tools, leisure products, medical devices and many other products. A wide variety of adhesives and sealants, sealing foams, potting materials, thermal interface materials, as well as greases and oils are used in the production of the various components. The systems used here for metering, mixing and application are an integral part of ‘mobile energy’.

Individually configurable metering and mixing technology
The production of all components necessary for the supply of this ‘mobile energy’ places significant demands on the metering technology. Batteries, current transformers, printed circuit boards and other electronic components need to be potted in order to protect them from dirt and moisture and to dissipate heat. The corresponding housings need to be bonded and sealed. DOPAG designs and supplies metering and mixing systems for all relevant production steps – from electronics potting and housing sealing to the greasing of moving parts.  DOPAG systems process one- and two-component adhesives and sealants, potting materials, lubricants and sealing foams precisely and reliably. Our engineers design the systems according to your specific needs and provide you with personal support through to commissioning and the stable production of your products.


We offer solutions for

Batteries and charging systems

E-mobility

Tools

Household appliances

Medical technology

We offer metering technology for these applications:

Sealing foams

Sealing foams

Seals housings externally and protects electronics from dust and moisture.

Bonding and sealing

Bonding and sealing

Components are bonded and sealed against dust and moisture.

Potting

Potting

Electrical and electronic components are potted with epoxy resin, for example, to protect them against dust and moisture.

Thermal interface materials

Metering of thermal interface materials

These connect electronic components to the heat sink, for example, providing protection against overheating.

Greasing and oiling

Greasing and oiling

Moving parts or seals are greased, which ensures a long functional life.

Reference projects

Markets

Choose your markets:
All DOPAG articles at a glance:
  1. Metering mixing and applying thermally conductive silicone material

    The vectomix TC metering and mixing system from DOPAG processes thermally conductive materials precisely and cleanly. This application shows the processing of Wacker Semicosil 9672.

    More
  2. Dispensing two different types of grease

    We configured an automated lubricant dispensing system that optimises production processes in the automotive industry.

    More
  3. Dispensing systems for the production of hydrogen tanks

    The eldomix dispensing system fills an impregnation bath for the production of hydrogen tanks using the filament winding process.

    More
  4. Gaskets and electronics potting for wallbox production

    PU gaskets and potting compounds protect the sensitive electronics in a wallbox against dust, dirt and moisture. We offer solutions for both applications.

    More
  5. Contactless application of grease and oil

    The contactless application of lubricants meets all conditions for complex, automated production processes and is now standard in many industries. We present the options.

    More
  6. Manual application of lubricants

    DOPAG offers special dispensing stations for the manual application of lubricants. With the help of an adapter, components such as O-rings and other seals can be greased or oiled manually. 

    More
  7. Potting electronics boards

    DOPAG provided a metering and mixing system for potting electronics boards for e-bike battery packs. 

    More
  8. Serial production of PU foam gaskets in the automotive industry

    With the dynamicLine, DOPAG offers an efficient solution for series production of PU foam gaskets in all industries.

    More
  9. Automated application of sealants

    DOPAG provides an individual solution for the application of one-component sealant in the production of cardan shafts for special vehicles.

    More
  10. Series production of PU foam gaskets

    With the dynamicLine, DOPAG offers an efficient solution for series production of PU foam gaskets in all industries.

    More
  11. Metering and mixing system for adhesive bonding of automotive components

    DOPAG develops a metering and mixing system for adhesive bonding of automotive components to ensure uniform standards worldwide.

    More
  12. Sealant dispensing for truck manufacturer

    DOPAG successfully supported a truck manufacturer with a dispensing system for the manual application of a single-component sealant.

    More
  13. Metering systems for optimal lubricant dispensing

    The requirements for the type of lubricant dispensing vary and always depend on the application being carried out. Learn here more about the four key factors for successful system design!

    More
  14. Dispensing thermal gap fillers

    Using thermal gap fillers leads to more advanced metering technology requirements - learn more about the solutions from DOPAG.

    More
  15. Automated application of PU gaskets on components

    Compared to manually inserted seals, automatically applied PU gaskets offer many advantages.

    More
  16. Shot valve for contactless greasing

    DOPAG presents the shot valve in a new video: It is perfectly suited for contactless material application in highly automated processes.

    More
  17. Individual grease dispensing

    DOPAG has developed two special lubricant application systems for the production of ball screws in automotive industry.

    More
  18. Automated grease metering

    DOPAG presents a production cell, that could be used for greasing and oiling applications. Disocver also valves for contactless material application.

    More
  19. Accurate dosing of grease and oil

    DOPAG developed a special dosing system for the automated lubrication of gas springs.

    More
  20. Lubrication in the automotive industry

    Individual grease and adhesive dispensing systems from DOPAG guarantee highest quality electric parking brakes.

    More
Show more

vectomix TC

Your specialist for processing thermal interface materials

Your benefits

  • Individual configuration for your metering and mixing system: we choose the right solution for you from our extensive range of components and systems.
  • Automation: we offer partially or fully automated solutions for all applications, such as standalone solutions, production cells and modules (metering system, control system, robot) for free integration into production lines.
  • All-round service: we are by your side until your series production is running stably and we support you with preventive maintenance, repairs, as well as training and rapid dispatch of replacement parts.
  • Uniform worldwide standards: inspection, maintenance and repair at DOPAG branches worldwide, with sales partners or on site in your facilities.

DOPAG offers specially developed dosing systems for dosing thermally conductive materials such as gap fillers, adhesives and sealants or potting compounds.

  1. vectomix TC

    vectomix TC

    The dispensing system vectomix TC is especially designed for metering and mixing thermally conductive materials.

Whether it be racks, headrests, door locks or just the wheel bearings in automobiles, all must be greased. DOPAG provides the optimum metering system for each of these applications.

  1. Chamber Metering Valves

    Chamber Metering Valves

    Chamber metering valves are used for dot application. They offer a wide range of shot sizes and feature a drip-free mechanism.

  2. Diaphragm Dispensing Valves

    Diaphragm Dispensing Valves

    Diaphragm dispensing valves are used for continuous application of 1K media. They can process reactive, abrasive and chemically aggressive material.

  3. Gear Flow Meter

    Gear Flow Meter

    Developed specifically for use in DOPAG metering systems, the flow meter is used for measuring the exact material flow rate at any given moment.

  4. Handheld Dispensing Valves

    Handheld Dispensing Valves

    Handheld dispensing valves from DOPAG enable a clean manual application of greases and oils.

  5. Handheld Metering Valves

    Handheld Metering Valves

    DOPAG offers a variety of handheld metering valves for the manual dispensing of lubricants.

  6. High-Speed Valves

    High-Speed Valves

    High-speed valves are used for contactless lubrication in automated processes. They are excellent at greasing hard-to-reach spaces in a clean and precise manner.

  7. Light barrier

    Light barrier

    The light barrier is used with shot and high-speed valves to monitor the number of discharged shots.

  8. Material pressure regulator

    Material pressure regulator

    The material pressure regulator ensures a pulsation-free dispensing of grease, oil and silicone.

  9. Needle Dispensing Valves

    Needle Dispensing Valves

    Needle dispensing valves offer high flexibility and are ideal for continuous applications of low to high viscosity media.

  10. Needle Metering Valves

    Needle Metering Valves

    Needle metering valves are ideal for applications requiring the application of small quantities with higher reproducibility and short cycle times.

  11. Pressure sensors

    Pressure sensors

    Pressure sensors for the monitoring of material pressure in complex dispensing processes using shot or spray valves.

  12. Pressure Tanks

    Pressure Tanks

    For effortless and clean feeding of low viscosity media such as paint, oils and preservatives.

  13. Pumps for lubricants

    Pumps for lubricants

    The lubriLine pump range offers products specially designed for the processing of grease and oil.

  14. Shot Valves

    Shot Valves

    DOPAG shot valves are designed for an accurate and contactless application of lubricants in automated production processes.

  15. Spray Guns

    Spray Guns

    The spray gun is our solution to manual full-surface application of greases and oils.

  16. Spray Valves

    Spray Valves

    The DOPAG spray valve has been specially designed for the application of grease and oil over the entire surface.

  17. Stroke detection

    Stroke detection

    The stroke detection device reliably monitors the correct activity in various dispensing and metering valve types.

  18. Transfer Pumps

    Transfer Pumps

    Transfer pumps are used for material feeding directly from the original containers.

Bonding and sealing is becoming an increasingly popular method of joining components without screws. With DOPAG systems, applications can be realized reliable and precise.

  1. economix

    economix

    The economix range of systems are compact, solvent free, pneumatically driven piston pump metering and mixing systems.

  2. eldomix

    eldomix

    The eldomix 100/600 range of systems are compact, solvent free, gear pump driven metering and mixing systems.

  3. variomix

    variomix

    The variomix range of systems are solvent free, compact, pneumatic or hydraulically driven piston pump metering and mixing systems.

  4. vectodis

    vectodis

    Vectodis is used to handle single component materials. Just a suitable material supply and metering computer is required.

  5. vectomix

    vectomix

    Vectomix is used to handle multi component materials. Due to its compatibility and modularity, two vectodis single component piston metering with equal or different sizes are used.

In Potting, resins such as silicones, polyurethanes or epoxy resins are used in liquid form. For the production process, DOPAG offers various metering and mixing systems.

  1. economix

    economix

    The economix range of systems are compact, solvent free, pneumatically driven piston pump metering and mixing systems.

  2. eldomix

    eldomix

    The eldomix 100/600 range of systems are compact, solvent free, gear pump driven metering and mixing systems.

  3. variomix

    variomix

    The variomix range of systems are solvent free, compact, pneumatic or hydraulically driven piston pump metering and mixing systems.

With dynamicLine and the new dynamic mixing head, DOPAG offers an efficient solution for all applications relating to gasketing.

  1. Dynamic mixing head

    Dynamic mixing head
    The dynamic mixing head with its new valve technology has been designed for mixing of low to  high-viscosity polymeric reaction substances for foaming, bonding, sealing, and potting.

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further Information

Close