Filament winding

Dispensing systems for filament wound composites

Filament winding, a similar technique to pultrusion, involves winding cylinders, tubes and containers. This manufacturing method is used whenever the composite material components have to withstand high pressure despite their low weight, for example in industry or in automotive manufacture and shipbuilding. In filament winding, the fibres, such as carbon or glass fibre, are continuously fed from a roll through an impregnating bath and then wound onto a winding mandrel. This rotates while a payout eye travels horizontally in line with the axis of the rotating mandrel, laying down fibres. Owing to the axial speed of the payout eye and the rotational speed of the mandrel, the angle of the fibrous angle varies, resulting in a fully wrapped profile.

The fibres are first impregnated in the bath. It is filled with materials such as polyurethane or epoxy resin and must be kept at a constant level during the winding process. The DOPAG metering system eldomix can perform this task, for example. The bath is precisely adjusted to the optimum resin content by means of a level sensor and this results in a constant, reliable production of fibre-reinforced composites.

Metering systems for filament winding

  1. compomix

    compomix

    The compomix DI was developed for dispensing epoxy and PU in infusion processes in the production of rotor blades.

  2. eldomix

    eldomix

    The eldomix 100/600 range of systems are compact, solvent free, gear pump driven metering and mixing systems.

  3. gluemix

    gluemix

    The gluemix was specially configured for the application of two-component adhesives in rotor blade production.

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further Information

Close